HARDWOOD FLOORING LEWISVILLE TX
Beautiful Hardwood Flooring in Lewisville, TX
Nothing says “home sweet home” better than solid wood flooring. It provides a warmth that no other material could give your sweet abode. Plus, it increases the value of your property because hardwood flooring is considered one of the most elegant and expensive types of amenities. Read on if you want to learn more about hardwood flooring in Lewisville, TX.
Hardwood flooring in Lewisville, TX are made of planks milled from a single piece of timber. These materials used in floors have a thicker wear surface and can also be sanded and finished.
Because it is made from an actual tree, hardwood floorings have certain limitations in terms of its dimensions. The highly recommended maximum widths and lengths of hardwood typically range between five inches or 127 millimeters wide and seven feet or 2100 millimeter long.
Because it is made of timber harvested from trees, hardwood flooring can be significantly more expensive particularly if the wood of your choice is rare and exotic. Among the domestic woods typically used in flooring are red oak, white oak, maple and many others. Red oak is considered one of the most sought-after species of wood used in construction.
What is the most durable material used in floors? This might be one of the most difficult questions homeowners try to figure out. Believe it or not, solid hardwood flooring is among the top 10 answers to this question.
But because it is made of real wood, hardwood flooring in Lewisville, TX is more prone to scratches and can get damaged when exposed to too much moisture. However, it definitely provides the best look to any home and even increases its value. Plus, it has a saving grace: it can be restored to its original, perfect condition.
Installation and Finishing
There is a wide variety of installation systems for hardwood flooring. These include the tongue-and-groove system, woodloc or ‘click’ systems, and floor connection system which can be installed by either the glue-down method, nail-down method, or the floating installation process.
The tongue-and-groove system is characterized by a groove on one side and end of the plank, and a tongue or a protruding wood along one edge center at the other side and end. The tongue and groove should fit snugly together to avoid movement in the adjoining planks. This kind of system can be installed through glue-down, floating, or nail-down.
The woodloc or ‘click’ systems is similar to the tongue-and-groove system but entails tapping on the groove to make the curved or barbed tongue fit into it. Because it is the easiest to do, it is a highly recommended system for the Do-It-Yourself market.
After installation, hardwood flooring needs finishing, buffing, and sanding to achieve its optimal quality and look. The most common finishes used in wood are oil-modified urethane and water-based polyurethane. Buffing, on the other hand, should be done every three to five years to maintain the flooring’s pristine condition. Meanwhile, sanding can provide a smooth finish onto the floor and can be done whenever improvement or maintenance is required.